Bottom price Suspension Parts Leaf Spring - 1421060 truck leaf spring air suspension part leaf spring – Jiachuang Detail:
Spring Measurements Specs
Totally 2 blades ,2pcs pad among blades , the 1st blade Width(mm)*Thickness(mm): 100*47, the 2nd blade Width(mm)*Thickness(mm): 100*45, the 1st Measurement 745 mm (Free Length Measurement),the 2nd Measurement 1125 mm (Free Length Measurement) , Tolerance range within ±2mm . 1pc composite bush Ø30*Ø68*121 comes to install spring eyes .
All datas are obtained by measuring the new produce product .
Scania
All Scania models till start of 5-series 2005 onward ,have a simple index system ,the first letter of the far left side(as known as prefix) is the cab type:G(rigidly mounted short,low cab),P(suspended low cab,short or long),R(high cab,short or long),and T(bonneted cab,short or long).Then first one or two digits indicate engine size(e.g.8,11,or 14 liter engine.denotes 82,112/111/110,or 144)and the last number before letter suffixes points out the series which are as followings:0-series(110 and 140 produced 1968-1974),1-series(111 and 141 produced 1974-1981),2-series(82,92,112 and 142 produced 1981-1988)3 series:93,113,143(1987-1995) and finally 4-series(94,114,124,144 and 164 produced 1995-2004).at the end letter suffixes(far right side)M,H,or E,relate to frame/suspension ratings-”medium”,”heavy”,or”extra-heavy”duty.In some models further codes like L,D,C and G were used compared to other to describe the chassistypes .
Finished Products Photos
Key Points Keep The High Quality
| 1) Raw matrail . |
| Thickness less than 20mm. we choose SUP9/55Cr3/SAE5160H as the product material |
| Thickness from 20-30mm. wE choose SUP11A/50CrVA |
| Thickness more than 30mm. We choose 51CrV4 as the raw material |
| Thickness more than 50mm. We choose 52CrMoV4 as the raw material |
| 2) Quchenging Process |
| We strickly controled the steel temeprure around 800 degree. |
| we swing the spring in the qenching oil among 10 seconds according to the spring thickness. |
| 3)Shot Peening. |
| Each assmembing spring set under stress peening . |
| Fatigue test can reach over 150000 cycus |
| 4) Painting |
| Each leaf under cataphoresis painting. |
| Salt spray testing reach 500hours |
Production Process
1.Material Cutting
4.Edge Cutting
7.Stress Peening
2.Punching
5.Quenching
8.Assembling
3.Eye Rolling
6.Tempering
9.Painting
FAQ
Q1: What type of leaf spring could you produce ?
A: We can produce most kinds of springs in the market. especially on the parabolic springs.
Q2: What material could you supply for leaf spring?
A: Our material grade should be SUP9/SUP9A /SUP11A/51CrV4 /52CrMoV4/ even 55Cr3 and SAE5160H as well .
Q3: How long will be your delivery time?
A: 20-40days. If material stock enough around 20days. if not,would be 40days
Q4: What payment terms are acceptable?
A: TT and LC at sight
Q5: What is the packing?
A: No fumigation wooden pallet . we also can pack according to whatever you request if reasonable.
Q6:How about the surface finishing ?
A : electrophoresis coating (black,red,gray,or as customer’s requests )
Product detail pictures:
Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Bottom price Suspension Parts Leaf Spring - 1421060 truck leaf spring air suspension part leaf spring – Jiachuang, The product will supply to all over the world, such as: Chile, Austria, Guatemala, Now, with the development of internet, and the trend of internationalization, we've got decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.
By Doreen from Nigeria - 2018.09.29 13:24
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Christian from Uruguay - 2018.06.18 17:25