Low price for Japan Auto Leaf Spring - Hot selling 11436 trailer suspension part leaf spring – Jiachuang Detail:
This spring assy are widely used in Thailand for trailer suspension parts .
Spring Measurements Specs
Totally 9 blades ,1-9 blade Width(mm)*Thickness(mm): 76*14, End to End Measurement 1210 mm (Free Length Measurement),Tolerance range within ±3mm . Free Arch Measurement (see picture) 110mm,Tolerance range within ±5 mm . hook on left of the 3rd blade .
All datas are obtained by measuring the new produce product .
Trailer Leaf Spring Process
Multi-leaf springs are made as follows:
1.Shearing of flat bar
2.Center hole punching / Drilling
3.End Heating process
(1).Eye Forming / Wrapper Forming forming (hot & cold process)
(2).Diamond cutting / end trimming / width cutting / end tapering
(3).End punching / end grooving / end bending / end forging / eye grinding
(4).Center hole punching / Drilling / nibbing
4.Heat Treatment
(1).Heating
(2).Camber forming
(3).Quenching
(4).Tempering
5.Surface preparation
(1).Shot peening / stress peening
(2).Painting
6.Eye bush preparation process
(1).Eye reaming / eye boring
(2).Bush insertion
(3).Bush reaming
7.Assemble
(1).Presetting & load testing
(2).Paint touch-up
(3).Marking & packing
Finished Products and Pack Photos
Key Points Keep The High Quality
| 1) Raw matrail . |
| Thickness less than 20mm. we choose SUP9/55Cr3/SAE5160H as the product material |
| Thickness from 20-30mm. wE choose SUP11A/50CrVA |
| Thickness more than 30mm. We choose 51CrV4 as the raw material |
| Thickness more than 50mm. We choose 52CrMoV4 as the raw material |
| 2) Quchenging Process |
| We strickly controled the steel temeprure around 800 degree. |
| we swing the spring in the qenching oil among 10 seconds according to the spring thickness. |
| 3)Shot Peening. |
| Each assmembing spring set under stress peening . |
| Fatigue test can reach over 150000 cycus |
| 4) Painting |
| Each leaf under cataphoresis painting. |
| Salt spray testing reach 500hours |
Production Process
1.Material Cutting
4.Edge Cutting
7.Stress Peening
2.Punching
5.Quenching
8.Assembling
3.Eye Rolling
6.Tempering
9.Painting
FAQ
Q1: What type of leaf spring could you produce ?
A: We can produce most kinds of springs in the market. especially on the parabolic springs.
Q2: What material could you supply for leaf spring?
A: Our material grade should be SUP9/SUP9A /SUP11A/51CrV4 /52CrMoV4/ even 55Cr3 and SAE5160H as well .
Q3: How long will be your delivery time?
A: 20-40days. If material stock enough around 20days. if not,would be 40days
Q4: What payment terms are acceptable?
A: TT and LC at sight
Q5: What is the packing?
A: No fumigation wooden pallet . we also can pack according to whatever you request if reasonable.
Q6:How about the surface finishing ?
A : electrophoresis coating (black,red,gray,or as customer’s requests )
Product detail pictures:
Related Product Guide:
Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for Low price for Japan Auto Leaf Spring - Hot selling 11436 trailer suspension part leaf spring – Jiachuang, The product will supply to all over the world, such as: Angola, Mexico, Wellington, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.
By Leona from Thailand - 2017.06.19 13:51
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Andrea from Mauritius - 2017.02.28 14:19